• TWT 1 TR

    UK SSP £49.00
    SHAPE Soprano
    TOP Mahogany
    BACK Mahogany, Arched
    SIDES Mahogany
    FINGERBOARD Techwood
    BRIDGE Black Walnut
    STRINGS Clear Nylon
    ELECTRONICS N/A
    FINISH Red Stain Satin
    Full Specification TWT1TR
    Tanglewood Tiare ukuleles have been researched and developed with patience and diligence. With influences from Polynesia, the name itself is taken from the national flower of Tahiti, capturing the essence of the South Pacific ensuring the Tiare models exemplify an authentic and traditional representation of the art of the ukulele. The Tiare ukuleles are made up of a contrasting range of exotic materials, from stunning Black Walnut to Figured Hawaiian Koa tone woods, specially selected by Tanglewood to have beautiful figuring in the grain to make each instrument unique. Every ukulele features a luxury “fiddleback” contoured back for increased sound projection and volume and Aquila strings, usually found on only the most professional high priced instruments as standard equipment. Models are also fitted with neck truss rods, along with chrome metal machine heads for precise tuning.
    Nut Width 35mm
    Width 14th Fret 44mm
    Scale Length 345mm
    Neck Thickness 1F 16mm
    Neck Thickness 7F 19mm
    Upper Bout Width 131mm
    Lower Bout Width 174mm
    Waist Width
    Body Depth (Neck) 59mm
    Body Depth (End) 59mm
    Body Length 237mm
    Overall Length 525mm
  • TWT 1 TB

    UK SSP £49.00
    SHAPE Soprano
    TOP Mahogany
    BACK Mahogany, Arched
    SIDES Mahogany
    FINGERBOARD Techwood
    BRIDGE Black Walnut
    STRINGS Clear Nylon
    ELECTRONICS N/A
    FINISH Thru Blue Stain Satin
    Full Specification TWT1TB
    Tanglewood Tiare ukuleles have been researched and developed with patience and diligence. With influences from Polynesia, the name itself is taken from the national flower of Tahiti, capturing the essence of the South Pacific ensuring the Tiare models exemplify an authentic and traditional representation of the art of the ukulele. The Tiare ukuleles are made up of a contrasting range of exotic materials, from stunning Black Walnut to Figured Hawaiian Koa tone woods, specially selected by Tanglewood to have beautiful figuring in the grain to make each instrument unique. Every ukulele features a luxury “fiddleback” contoured back for increased sound projection and volume and Aquila strings, usually found on only the most professional high priced instruments as standard equipment. Models are also fitted with neck truss rods, along with chrome metal machine heads for precise tuning.
    Nut Width 35mm
    Width 14th Fret 44mm
    Scale Length 345mm
    Neck Thickness 1F 16mm
    Neck Thickness 7F 19mm
    Upper Bout Width 131mm
    Lower Bout Width 174mm
    Waist Width
    Body Depth (Neck) 59mm
    Body Depth (End) 59mm
    Body Length 237mm
    Overall Length 525mm
  • TWT 1 SB

    UK SSP £49.00
    SHAPE Soprano
    TOP Mahogany
    BACK Mahogany, Arched
    SIDES Mahogany
    FINGERBOARD Techwood
    BRIDGE Black Walnut
    STRINGS Clear Nylon
    ELECTRONICS N/A
    FINISH Sunburst Satin
    Full Specification TWT1SB
    Tanglewood Tiare ukuleles have been researched and developed with patience and diligence. With influences from Polynesia, the name itself is taken from the national flower of Tahiti, capturing the essence of the South Pacific ensuring the Tiare models exemplify an authentic and traditional representation of the art of the ukulele. The Tiare ukuleles are made up of a contrasting range of exotic materials, from stunning Black Walnut to Figured Hawaiian Koa tone woods, specially selected by Tanglewood to have beautiful figuring in the grain to make each instrument unique. Every ukulele features a luxury “fiddleback” contoured back for increased sound projection and volume and Aquila strings, usually found on only the most professional high priced instruments as standard equipment. Models are also fitted with neck truss rods, along with chrome metal machine heads for precise tuning.
    Nut Width 35mm
    Width 14th Fret 44mm
    Scale Length 345mm
    Neck Thickness 1F 16mm
    Neck Thickness 7F 19mm
    Upper Bout Width 131mm
    Lower Bout Width 174mm
    Waist Width
    Body Depth (Neck) 59mm
    Body Depth (End) 59mm
    Body Length 237mm
    Overall Length 525mm
  • TWT 1 FG

    UK SSP £49.00
    SHAPE Soprano
    TOP Mahogany
    BACK Mahogany, Arched
    SIDES Mahogany
    FINGERBOARD Techwood
    BRIDGE Black Walnut
    STRINGS Clear Nylon
    ELECTRONICS N/A
    FINISH Forest Green Stain Satin
    Full Specification TWT1FG
    Tanglewood Tiare ukuleles have been researched and developed with patience and diligence. With influences from Polynesia, the name itself is taken from the national flower of Tahiti, capturing the essence of the South Pacific ensuring the Tiare models exemplify an authentic and traditional representation of the art of the ukulele. The Tiare ukuleles are made up of a contrasting range of exotic materials, from stunning Black Walnut to Figured Hawaiian Koa tone woods, specially selected by Tanglewood to have beautiful figuring in the grain to make each instrument unique. Every ukulele features a luxury “fiddleback” contoured back for increased sound projection and volume and Aquila strings, usually found on only the most professional high priced instruments as standard equipment. Models are also fitted with neck truss rods, along with chrome metal machine heads for precise tuning.
    Nut Width 35mm
    Width 14th Fret 44mm
    Scale Length 345mm
    Neck Thickness 1F 16mm
    Neck Thickness 7F 19mm
    Upper Bout Width 131mm
    Lower Bout Width 174mm
    Waist Width
    Body Depth (Neck) 59mm
    Body Depth (End) 59mm
    Body Length 237mm
    Overall Length 525mm
  • TWT 1 CE

    UK SSP £89.00
    SHAPE Cutaway Soprano
    TOP Mahogany
    BACK Mahogany, Arched
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Eboncore
    STRINGS Clear Nylon
    ELECTRONICS TEQ-TUT
    FINISH Natural Satin
    Full Specification TWT1CE
    Tanglewood Tiare ukuleles have been researched and developed with patience and diligence. With influences from Polynesia, the name itself is taken from the national flower of Tahiti, capturing the essence of the South Pacific ensuring the Tiare models exemplify an authentic and traditional representation of the art of the ukulele. The Tiare ukuleles are made up of a contrasting range of exotic materials, from stunning Black Walnut to Figured Hawaiian Koa tone woods, specially selected by Tanglewood to have beautiful figuring in the grain to make each instrument unique. Every ukulele features a luxury “fiddleback” contoured back for increased sound projection and volume and Aquila strings, usually found on only the most professional high priced instruments as standard equipment. Models are also fitted with neck truss rods, along with chrome metal machine heads for precise tuning.
    Nut Width 35mm
    Width 14th Fret 44mm
    Scale Length 345mm
    Neck Thickness 1F 16mm
    Neck Thickness 7F 19mm
    Upper Bout Width 131mm
    Lower Bout Width 174mm
    Waist Width
    Body Depth (Neck) 59mm
    Body Depth (End) 59mm
    Body Length 237mm
    Overall Length 525mm
      SHAPE:
    • TOP: Mahogany
    • BACK: Mahogany, Arched
    • SIDES: Mahogany
    • NECK (MATERIAL): Okoume
    • FINGERBOARD: Techwood
    • BRIDGE: Techwood
    • BINDING: None
    • SADDLE: ABS Ivory White
    • NUT: ABS Ivory White (35mm)
    • SCALE LENGTH: 345mm
    • MACHINE HEADS: Die cast Chrome
    • FINISH: Natural Satin
    • EQ:
    • STRINGS: Nylon Clear
    • SKU: TWT1CE
    • RANGE: Tiare
    • UPC: 819907020109
  • TWT 1

    UK SSP £49.00
    SHAPE Soprano
    TOP Mahogany
    BACK Mahogany, Arched
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Eboncore
    STRINGS Clear Nylon
    ELECTRONICS N/A
    FINISH Natural Satin
    Full Specification TWT1
    Tanglewood Tiare ukuleles have been researched and developed with patience and diligence. With influences from Polynesia, the name itself is taken from the national flower of Tahiti, capturing the essence of the South Pacific ensuring the Tiare models exemplify an authentic and traditional representation of the art of the ukulele. The Tiare ukuleles are made up of a contrasting range of exotic materials, from stunning Black Walnut to Figured Hawaiian Koa tone woods, specially selected by Tanglewood to have beautiful figuring in the grain to make each instrument unique. Every ukulele features a luxury “fiddleback” contoured back for increased sound projection and volume and Aquila strings, usually found on only the most professional high priced instruments as standard equipment. Models are also fitted with neck truss rods, along with chrome metal machine heads for precise tuning.
    Nut Width 35mm
    Width 14th Fret 44mm
    Scale Length 345mm
    Neck Thickness 1F 16mm
    Neck Thickness 7F 19mm
    Upper Bout Width 131mm
    Lower Bout Width 174mm
    Waist Width
    Body Depth (Neck) 59mm
    Body Depth (End) 59mm
    Body Length 237mm
    Overall Length 525mm
  • TWR2 SFCE LH

    UK SSP £239.00
    SHAPE Left Handed Cutaway Super Folk
    TOP Cedar
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS Tanglewood TW-EX4
    FINISH Natural Satin
    Full Specification TWR2SFCELH
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Red Cedar tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Cedar tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 650mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 276mm
    Lower Bout Width 381mm
    Waist Width 230mm
    Body Depth (Neck) 92mm
    Body Depth (End) 102mm
    Body Length 473mm
    Overall Length 984mm
  • TWR2 SFCE

    UK SSP £229.00
    SHAPE Cutaway Super Folk
    TOP Cedar
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS Tanglewood TW-EX4
    FINISH Natural Satin
    Full Specification TWR2SFCE
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Red Cedar tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Cedar tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 650mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 276mm
    Lower Bout Width 381mm
    Waist Width 230mm
    Body Depth (Neck) 92mm
    Body Depth (End) 102mm
    Body Length 473mm
    Overall Length 984mm
  • TWR2 PE

    UK SSP £199.00
    SHAPE Parlour
    TOP Cedar
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS Tanglewood TW-EX4
    FINISH Natural Satin
    Full Specification TWR2PE
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Red Cedar tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Cedar tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 628mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 256mm
    Lower Bout Width 367mm
    Waist Width 218mm
    Body Depth (Neck) 89mm
    Body Depth (End) 99mm
    Body Length 492mm
    Overall Length 967mm
  • TWR2 O LH

    UK SSP £179.00
    SHAPE Left Handed Orchestra/Folk
    TOP Cedar
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS N/A
    FINISH Natural Satin
    Full Specification TWR2OLH
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Red Cedar tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Cedar tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.  
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 650mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 276mm
    Lower Bout Width 381mm
    Waist Width 230mm
    Body Depth (Neck) 92mm
    Body Depth (End) 102mm
    Body Length 473mm
    Overall Length 984mm
  • TWR2 O

    UK SSP £169.00
    SHAPE Orchestra/Folk
    TOP Cedar
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS N/A
    FINISH Natural Satin
    Full Specification TWR2O
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Red Cedar tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Cedar tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 650mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 276mm
    Lower Bout Width 381mm
    Waist Width 230mm
    Body Depth (Neck) 92mm
    Body Depth (End) 102mm
    Body Length 473mm
    Overall Length 984mm
  • TWR2 DCE

    UK SSP £229.00
    SHAPE Cutaway Dreadnought
    TOP Cedar
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS Tanglewood TW-EX4
    FINISH Natural Satin
    Full Specification TWR2DCE
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Red Cedar tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Cedar tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 650mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 306mm
    Lower Bout Width 406mm
    Waist Width 283mm
    Body Depth (Neck) 101mm
    Body Depth (End) 121mm
    Body Length 513mm
    Overall Length 1045mm