• SHAPE Left Handed Cutaway Super Folk
    TOP Spruce
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS Tanglewood TW-EX4
    FINISH Natural Satin
    Full Specification TWR2SFCELH
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Spruce tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Spruce tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 650mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 276mm
    Lower Bout Width 381mm
    Waist Width 230mm
    Body Depth (Neck) 92mm
    Body Depth (End) 102mm
    Body Length 473mm
    Overall Length 984mm
  • TWR2 PE

    £299.00
      Parlour guitars, with their diminutive physical dimensions and vintage styling always stand out on a retailers wall, but in reality, this was  the original acoustic body shape for scores of years, Dreadnought and Folk and other variants didn’t appear until many years after the Parlour, so they are not quite as rare as we often think. To compliment the heritage of the parlour shape, we marry a Canadian Spruce top, with Indonesian Mahogany, ensuring we have a great tone, then we brace the top as we would a folk model, so that we get a tremendous sound projection. This model has an onboard Tanglewood EX4 EQ system, with 4 band graphic, so it can be used live or in the studio, and if you zoom in on the picture you will note the lovely hand inlaid genuine timber rosette which we think finishes the instrument off perfectly. A classic shape for the discerning player.
    SHAPE Parlour
    TOP Spruce
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS Tanglewood TW-EX4
    FINISH Natural Satin
    Full Specification TWR2PE
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Spruce tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Spruce tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 628mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 256mm
    Lower Bout Width 367mm
    Waist Width 218mm
    Body Depth (Neck) 89mm
    Body Depth (End) 99mm
    Body Length 492mm
    Overall Length 967mm
  • TWR2 DCE

    £299.00
    SHAPE Cutaway Dreadnought
    TOP Spruce
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS Tanglewood TW-EX4
    FINISH Natural Satin
    Full Specification TWR2DCE
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Spruce tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Spruce tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 650mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 306mm
    Lower Bout Width 406mm
    Waist Width 283mm
    Body Depth (Neck) 101mm
    Body Depth (End) 121mm
    Body Length 513mm
    Overall Length 1045mm
  • TWR2 SFCE

    £299.00
      Our classic and unique Tanglewood shape, the Super Folk cutaway is represented perfectly in this model. From the warm Spruce top, imported from Canada to the elegantly detailed hand inlaid wood rosette, this instrument oozes understated quality. The Spruce top gives the guitar an immediate, well voiced, bass rich sound right out of the box. We love the stripped down, natural look of these guitars, we believe their value for money is outstanding and if you want a stunning contemporary guitar that is all about the sound, you’ve found it here.
    SHAPE Cutaway Super Folk
    TOP Spruce
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS Tanglewood TW-EX4
    FINISH Natural Satin
    Full Specification TWR2SFCE
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Spruce tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Spruce tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 650mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 276mm
    Lower Bout Width 381mm
    Waist Width 230mm
    Body Depth (Neck) 92mm
    Body Depth (End) 102mm
    Body Length 473mm
    Overall Length 984mm
  • TWR2 O LH

    £239.00
    This Roadster II model is our left handed Folk size acoustic. It has a Canadian Spruce top married to an Indonesian Mahogany back and sides for a classic voice tone. We created this model after being inspired by Folk shaped left handed guitars that Paul McCartney often plays, and knowing everyone may not have the same purchase budget, we’ve tried to make the guitar as competitively priced as we can without sacrificing the integrity of the components. Our tapered bracing system helps the guitar project really well, the Spruce top gives an instant warm tone right out of the box, and we believe any player will be inspired after playing a while on this lovely instrument.
    SHAPE Left Handed Orchestra/Folk
    TOP Spruce
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS N/A
    FINISH Natural Satin
    Full Specification TWR2OLH
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Spruce tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Spruce tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.  
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 650mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 276mm
    Lower Bout Width 381mm
    Waist Width 230mm
    Body Depth (Neck) 92mm
    Body Depth (End) 102mm
    Body Length 473mm
    Overall Length 984mm
  • TWR2 D

    £229.00

    Our classic dreadnought is inspired by the instrument shape so revered across musical generations. From Elvis to the Eagles, Led Zeppelin to Clapton, so many great songs have been written and immortalised on instruments of this body style, so we have to always have this model available to meet demand. We use a Canadian Spruce top, braced in a tapered system with quarter sawn spruce, to give an instant aural appeal straight out of the box. We maintain the classically understated natural look of the instrument in our styling, and it’s one of the few model ranges we have that looks both contemporary yet slightly vintage at the same time. Choose this model if your a traditionalist and like understated elegance.

    SHAPEDreadnought
    TOPSpruce
    BACKMahogany
    SIDESMahogany
    FINGERBOARDEboncore
    BRIDGEBlack Walnut
    STRINGSPhosphor Bronze 12-53 Gauge
    ELECTRONICSN/A
    FINISHNatural Satin
    Full SpecificationTWR2D

    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Spruce tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box.

    We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair!

    Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Spruce tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.

    Nut Width43mm
    Width 14th Fret54mm
    Scale Length650mm
    Neck Thickness 1F21mm
    Neck Thickness 10F23mm
    Upper Bout Width306mm
    Lower Bout Width406mm
    Waist Width283mm
    Body Depth (Neck)101mm
    Body Depth (End)121mm
    Body Length513mm
    Overall Length1045mm
  • TWR2 O

    £229.00
    SHAPE Orchestra/Folk
    TOP Spruce
    BACK Mahogany
    SIDES Mahogany
    FINGERBOARD Eboncore
    BRIDGE Black Walnut
    STRINGS Phosphor Bronze 12-53 Gauge
    ELECTRONICS N/A
    FINISH Natural Satin
    Full Specification TWR2O
    Inspired by nature and the raw beauty of classic timber, Roadster II instruments make a truly organic and understated natural statement. We’ve long pioneered the practise of sustainable forestry in the pursuit of our art and for this latest Roadster series we match finely graded Canadian Spruce tops with traditional Indonesian mahogany back and sides to produce tonally rich instruments that sound instantly wonderful tuned up right out of the box. We call them Roadster because to us, their cosmetic appeal evokes a sense of being close to nature… just as driving a classic open top car with the wind in your hair! Our luthiers have to work especially hard in creating this look, finishing the smooth edging joins of the body very carefully because there is no binding added to the body of these models, therefore no margin for error. Roadster II Spruce tops are finished and sealed in high grade, low density satin lacquer and as well as capturing the stripped down raw timber cosmetic effect we envisaged on the drawing board, we are sure this also adds to their sweet sounding sonic appeal.
    Nut Width 43mm
    Width 14th Fret 54mm
    Scale Length 650mm
    Neck Thickness 1F 21mm
    Neck Thickness 10F 23mm
    Upper Bout Width 276mm
    Lower Bout Width 381mm
    Waist Width 230mm
    Body Depth (Neck) 92mm
    Body Depth (End) 102mm
    Body Length 473mm
    Overall Length 984mm

Go to Top